- Embroidery Digitizing
- Vector Conversion
- Custom Patches
- Contact us
With all the fun and action that goes around in the embroidery digitizing, the process is not as easy as it sounds. When you are dealing with the stitches, embroidery machine, and software, there goes a lot of hustle and bustle. You will come up with different stitch issues and machine embroidery problems.
In this article, we will take a look at some common issues in embroidery that you may encounter in the long run of the digitizing process. But before we dig deep into the troubleshooting of the embroidery problems it is essential to know the basic definition of machine embroidery.
Embroidery is the making of a design or pattern on a fabric with the help of needles and threads that are sewn by hand. If we do the same work through a machine, then it is called machine embroidery. The designs we make on embroidery software are converted to suitable files that the embroidery machine can read easily.
The process becomes superfast with a machine. However, with all the comfort and ease we do have problems and issues in embroidery. Let’s take a look at how to troubleshoot common problems.
Whether you are an expert digitizer or a novice who has just taken the first step in the digitizing world, these are the common embroidery issues that you may come up with during the process.
It is a common issue that we will see - the machine making noise while running. Unlike any other machine, the one used in the embroidery is no different. It demands maintenance and cleaning, oiling, and service.
We need to take care of the machine every now and then to avoid noise problems. Make sure to clean the feed teeth and other areas. Check whether the needle is working properly. If not, insert a new one.
Thread breaks are common in embroidery digitizing. We cannot stop it. Even professional digitizer have to cater to this problem. however, we can take certain measures to prevent it from happening too often.
Thread breaks occur if the tension is too high in the needle. It can also happen if the needle is small or inserted in the wrong way. It can also occur if the spool cap is small.
To prevent thread breaks, first, check the needle. Insert the needle in a proper way. Adjust the tension between the needle and thread. Use a thread net over the spool.
You will also see bobbin thread breaks. It happens if the bobbin is not placed properly or it is damaged or the case of the bobbin is damaged.
The solution for this is to change the bobbin or rewind it.
It is prevailing to have needle breaks. The problem is common for machine embroidery. As the name suggests, needle breaks occur if the needle is bent, loose, small, or if the stitch position is not matching the surface.
The basic troubleshooting for these problems is to insert a new needle. Use the correct size of the embroidery needle according to the fabric size and use the correct stitch type.
Bird nesting occurs when the thread gathers between the needle and the fabric. The name is given because the error resembles the bird’s nest. It creates a hindrance in the movement of the fabric that results in high tension in the thread.
The solution for bird nesting is to adjust the tension. Make sure to hoop your fabric material correctly. There shouldn’t be any gap between the hoop and the sewing arm.
These are the most common issues in the embroidery machine. Follow the above guidelines and you will be able to cater to these problems easily. In case you have any questions about any machine embroidery problems or embroidery digitizing, in general, feel free to take our help. It’s our audacious promise to give you the best advice and services at economical rates.
Dec 23 , 2021 at 01:01:04
Dec 23 , 2021 at 01:01:04
Dec 23 , 2021 at 00:53:39